Malaysian Ringgit
US Dollar
Indonesian Rupiah
Vietnamese Dong
Philippine Peso
Thai Baht
Singapore Dollar
Brunei Dollar
Product Description
Product details
The RIB (RIB = Rigid Inflatable Boat) is the perfect combination between classic inflatables and fully rigid boats. The SEATEC PRO SPORT rigid inflatable boat is made from an inflatable tube body with multiple air chambers and a solid, double-layered GRP hull. This vessel allows you to combine the security, stability, light weight and ease of use of traditional inflatable boats with the dynamics, handling and comfort of fully rigid boats. The SEATEC PRO RIBs have exceptional handling characteristics due to their excellent weight distribution, optimized hulls and the large diameter of their tubular bodies.
When driving in rough water conditions, the specialized characteristics of SEATEC PRO SPORT RIBs guarantee a higher degree of safety and comfort on board. Their light weight enables both easy lowering into water, as well as amazing performance and an exhilarating driving experience.
Technical data:
- 3 air chambers
- Flush "Halkey Roberts" - valve
- 2 sturdy, collapsible aluminum paddles with plastic sheaths
- 1 towing eye in the bow area
- 3 carrying handles, two on the stern, one on the bow
- Additional carrying rope on the inside of the stern
- Dual-sided grip cord
- Circumferential baseboard
- GRP transom with reinforcement for motor mounting
- Bailer in the transom
- Seating board
- Foot pump, carrying bag, repair kit
Technical data:
| Colour | Sand/white |
| Bow Form | Modern (MX) |
| Rubbing strake | Type F in dark-grey/white |
| Lifeline | Yes |
| Seating board | 1 |
| Towing eyes/Transport eyes | 1 / 3 |
| Length | 2.74 m |
| Width | 1.68 m |
| Length (inner) | 1.95 m |
| Width (inner) | 0.79 m |
| Hose-Diameter | 44.5 cm |
| Air chambers | 3 sections |
| Pack size (L x W x H) | 278 x 112 x 46 cm |
| Weight | 65.8 kg |
| Air Pressure | 0.25 bar |
| Max. Engine Power | 7.4 kW / 10 hp |
| Max. Engine Weight | 55 kg |
| Recommended Shaft Length | Short shaft |
| Payload | 500 kg |
| Carrying capacity | 4 |
Note regarding the material:
The SEATEC rigid inflatable boats are made of a special 5 layer PVC (polyvinyl chloride) material. The base consists of a poly fiber (polyester) fabric lining. The fabric is made of 1100 Decitex and is thus very sturdy. The fabric is lined on the interior and exterior with a so-called adhesive layer. This layer serves as a substrate for the equally double-sided PVC coating. Thanks to the PVC coating, the dinghy is airtight and sturdy. Only first-rate PVC material is used, which has specially been developed for the production of dinghies and has proven its durability for years. The material strength is approx. 0.7 mm and the boat's skin weighs about 850 g/m². The material is made in Germany. Max. tensile force is approx. 2500 N/ 5 cm.
