Perko 0541 Vented Petrol Deck Filler (38mm Straight Neck / 16mm Vent) PN 0541DPGCHR

PERKO

(No reviews yet) Write a Review

SKU:: 0541DPGCHR-GBA
Availability:: Usually ships in 24 hours - 48 hours
Weight:: 1.00 KGS
Width:: 15.00 (cm)
Height:: 15.00 (cm)
Depth:: 15.00 (cm)
Shipping:: Calculated at Checkout

Overview
Reviews

Product Description

Straight Neck
Chrome Plated Bronze Cap
Black Polymer Body
Stainless Steel Bead Chain
Integral Tank Vent with Flame Arrestor and Anti Surge Valve
*Note: Consider using the Mounting Ring (Fig. 0540DPRBLK) for all installations. DP package includes mounting ring.

Technical Information

For Hose Size: 1-1/2"
For Vent Hose: 5/8"
O.D. Flange: 3-3/8"
Mounting Hole Diameter: 2-1/8"
Neck Length: 2-7/16"
Screw Size: #8

Mounting Ring for Vented Fills

The use of these heightening rings is required in any application where water might be splashed around a vented fill. The ring raises the opening between the fuel cap and fill an additional 3/8" above the deck surface, thereby reducing the likelihood that splashed water will enter the fuel system through the breathing vent. The split version of the ring is designed for aftermarket use on existing installations. In most cases, it allows the ring to be added without disconnecting fuel and vent hoses from the fill. For new OEM installations, rings are supplied without the split since they can be installed before hoses are connected to the fill.

NOTE: The ring will not prevent water from entering the system if the cap becomes submerged or substantially flooded. If this situation exists, the fill/vent must be moved to a dry location or replaced with a sealed cap and a separate vent located elsewhere.