Malaysian Ringgit
US Dollar
Indonesian Rupiah
Vietnamese Dong
Philippine Peso
Thai Baht
Singapore Dollar
Brunei Dollar
Product Description
Beautifully designed on-board WC in an elegant, space-saving design. This Jabsco toilet is supplied with an externally mounted, self-priming seawater pump and Pumpguard™ filter.
Product details
Beautifully designed on-board WC in an elegant, space-saving design. This toilet is supplied with an externally mounted, self-priming seawater pump and Pumpguard™ filter. The seawater pump always supplies enough seawater, river water or seawater.
Thanks to the angled back, the DELUXE FLUSH toilet requires only a minimum of installation space and can therefore also be installed in smaller boats. Installation on angled surfaces is therfore also possible.
The "One-Touch" flushing cycles, which can be activated by the user at the touch of a button, ensure economical flushing processes (< 1 litre with Quick Flush). As a result, a relatively small waste-holding tank can be installed.
The supplied control panel can be used to select between the following flushing modes:
- "Fill": use when the bowl is dry to fill with 1 litre of water
- "Quick Flush": flushes first and then empties the bowl after light usage. If the "Dry Option" is selected, less than 1 litre of water is used.
- "Flush": flushes and empties the bowl two times after intensive use.
- "Empty": empties the bowl, without water filling it again afterwards.
Operation can also be set so that water either refills in the bowl after flushing (wet option) or not (dry option).
Note: Even if the bowl looks "dry", a water odor block in the body of the pump is always activated.
Technical data
Note: Even if the bowl looks "dry", a water odor block in the body of the pump is always activated.
Technical data
- Bowl, seat and lid
- Easy to clean hygienic bowl out of white glass ceramic
- Comfortable seat and lid made out of wood with resistant varnish
- Flushing pump
- Self priming pump (3m), driven by a permanent-magnet ball bearing motor, dry cycle membrane waterpump, 12 V 25 A
- Control Panel
- Permanent water tight "One-Touch" operation panel with 3 m long connection cord, integrated connection plugs with fast cuppling and shrink wrap seal
- Connectors
- Inlet and outlet of the seawater flush pump and flush water inlet of the toilet: 19 mm (3/4") hose nozzles
- Waste pump outlet: 38 mm (1 1/2") hose nozzle
- Dimensions
- Toilet (LxWxH): 450 x 375 x 366 mm
- The following items are required for assembly and are not included in the delivery contents:
- 4 x 6 mm stainless steel screws with a length corresponding to the thickness of the mounting surface
- 4 stainless steel nuts, self securing if possible.
- 4 plastic and 4 stainless steel washers 6 mm in size
- Silicone sealant
Wiring
| 1 | 6 way connector for connecting the operation panel |
| 2 | Mutual mass (-) to connect both pumps (waste and flushing pump) |
| 3 | Power supply of the system, red = +, black = - |
| 4 | + cabling for both pumps, orange cable for waste pump, blue cable for flushing pump |
